Basic Info.
Type
Insulating Glass Production Line
Glass Washing Machine Type
Ultrasonic Glass Washing Machine
Trademark
WEILI(made in china)
Transport Package
Plywood Pallet
Origin
Jinan Shandong China
Product Description
LBW2500PB Vertical Automatic Insulating Glass Outside Assembly Flat Press Production Line
Usage: LBW2500PB Vertical Automatic Insulating Glass Outside Assembly Flat Press Production Line is a high-efficiency insulating glass processing equipment. This line can not only produce ordinary insulating glass but also for low-e insulating glass. It is a better mass production equipment to produce insulating glass with high automatic degree, high efficiency, easiness of operation and maintenance.
Structure and Function for Each Part This production line is composed of feed section, washing and drying section, transition and storage section, light inspection section and spacer bar location section, outside assembly section, inside flat press section, and storage section.
This line is controlled by PLC and realizes the automatic control and frequency control of the motor speed of the whole line. It adopts advanced assembly technique and solves the problems of uneven press and misplacement of the glass. The assembly section adopts limit switch and cylinder tank whose travel distance can be adjusted, making the operation easy and the location precise and the movement reliable.
There are two operation methods in the control panel: 'automatic' and 'manual'. If the separate operation of each section or maintenance is needed, the 'manual' operation method is needed.
The structure and function of each section are as following.
1) The entire machine's operation uses the man-machine contact surface (it has Chinese and English languages):
Operates direct viewing and convenient, the running status is dynamic demonstration, the frequency conversion velocity modulation; the maximum speed may amount to 45 meters/Minute.
2) High production efficiency: The big glass can move at the full speed, the small glass is possible to stop in storage area, and stay at the storage area temporarily, also the clean glass may input continuously.
3) Conserves energy interrupted type automatic operation system:
Entire machine uses the energy conservation interrupted type automatic operation system, when glass movement to the photoelectric sensor of the end of the input conveyor, the brush, the water pump, the air blower will be start automatically, when the production is interrupted, the brush, the water pump, the air blower will automatically stop, the section of the equipment which was occupied moves in full speed, other parts which do not work are at the intelligence dormant state, so it is energy saving.
Secotion1: Feed Section:Low-E glass automatic diagnosis system. The back board is high density board with film
It is the first section of the line and its main function is to transmit the glass to the washing and drying section. The transmission is carried out by chains driven by the motor and the transmission speed is stable. It runs at the same speed of the washing and drying section and the speed can be changed by the inverter. It can avoid the back board bending and deformation, also can waterproof, avoid acid-base.
4) LOW-E glass automatic diagnosis system: it can easily know whether low-E glass putting is right or not. When is wrong, the alarm will raise the alarm, and worker can change it immediately. This system prevents the membrane of coating glass (especially the LOW-E glass) from being destroyed, the glass input conveyor station is loaded with the coating glass automatic diagnosis system, fully guaranteed the correct washing and covering of the coating glass.
Section2:Washing and Drying Section:Washing part:This part has three pairs of brushes (the material is high -temperature nylon wire ) and a pair of sponge roller. The brushes are driven by three synchronous motors separately and the movement is stable. Three pairs of tubular rollers type of hair brushes, use High Temperature Resistant and soft nature hair brush, fully guaranteed the coating glass especially the LOW-E glass layer stratification can't be destroyed.
6) Drying part: the air enters into the air knife from the top. The distance between the air knife and the glass should be adjusted according to the thickness of the glass in order to guarantee the drying effect. Air passage adopts the most advanced design and increase the drying speed and productivity.
Section3: Transition and Storage Section: This section is used to transmit and store the glass to improve the work efficiency
Section4. light inspection section and spacer bar location section This section is used to inspect the washing and drying quality of the glass. The lights are put perpendicularly with the glass and the back board is painted black. It is easy to check the washing and drying effect. When the back end of the glass passes the photoelectric switch, the transmission speed will increase automatically.
When the glass is sensed by the photoelectric switch in this section, the transmission speed will slow down. The glass will slowly touch the side gauge bar and stops. It makes the location precise and avoids the crash of the glasses because of high speed transmission. The position to put spacer bar is located automatically by location paws and the spacer bar should be stick onto the glass manually.
Section5.Outside Assembly Section7) These two wheels are controlled by Airtac cylinder, and they can easily push the glass tightly together.
The sensor can easily know the glass position and stop at right place when glass coming from the light and aluminum bar installation section.
Section 6.Inside Flat Press Section10) The linear guide rail to make the whole plate move from front to back
10.1 In this section, the back board is steel plate with spraying plastic. Plate board is high density board with film, can be waterproofed, non-deformation, can bear beat.
10.2 Adopts imported high quality vacuum generator, it can keep pressure more than 0.8Mpa, and also can automatically adjust the sucker's power, avoid glass falling down. (Inside assembly function is optional.)
10.3 This section can be opened to check and maintain. There are lifting up device, avoid misplacement of two or three glass, especially for big glass. There are straight line guide rail, it can guarantee glass press parallel with high accuracy.
10.4 The air cushion is clean with specific filtering air cushion system, can avoid the second pollution when glass pressing. The air cushion valve can be controlled.
Section7. Transition and Storage Section:This section is used to transmit and store the glass to improve the work efficiency
Technical parameterPower Supply | 380V/50HZ 35Kw |
Dimension(LxWxH) | 21600x2800x3450mm |
Production quantity | 600-700IG units/8hs |
Max Glass Size | 1800x2500mm |
Min Glass Size | 300x400mm |
Washing Glass Thickness | 3-15mm |
Washing Glass Speed | 0-10m/min |
Insulating Glass Thickness | ≤48mm |
Transmission Glass Speed | 45m/min |
Compressed Air: | 0.8m³/min |
Air Pressure: | 1Mpa |
Our ServiceInstallation: If the buyer needs, the seller will send one or two technicians (one is electrical engineer, one is mechanical engineer) to install the machines and help train the workers.
Warranty time: Usually one year.
Company InformationJinan Weili Machine Co.,Ltd is in the service of construction glass and glass industries. It is mainly specialized in producing door-window of energy conservation insulated glass production line of curtain wall, and glass deep-processing equipment.
Based on the operating mode:"Professional, Meticulous, High, Top" ,our company has grown up to the leader of equipment line. It makes effort to create respected brand name by all glass industries.
Constantly making innovations, Capturing high technology, prompting the total level of industry, then to make Chinese mature and high technology insulating glass equipment for international, and accepted by international users. That is the Weili people working's goal and responsibility.
FAQ1.Q:Are you manufacture?
Yes,we are the professional manufacture which have more than 5 workshops.
2.Q: How about the service ?
1).reply it at once if from Ali-trademanager,if by email,it reply it within 12 hour
2).deliver max. days within 15 days
3).more than 22 years experience in this kind machine field
4).fluent english ,communication barrier free
3.Q:What's the guarantee ?
1).Our guarantee for 12 months.
2).24 hour's technical support by email or calling
3).English manual and video tutorial
4).2 year quality guaranty for the machine (excluding the consumables)
5).We will provide the consumable parts at an agency price
6).24 hours on line service each day, free technical support.
Welcome to visit us - WEILI Glass Machine!*More videos in our YouTube website:
https://jnweilijiqi.en.made-in-china.com
Address:
No. 8, North Area, Xiaotun Industrial Area, Huaiyin District, Jinan, Shandong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Construction & Decoration, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001, ISO 9000
Company Introduction:
Jinan Weili Machine Co., Ltd is the member of China Glass Machinery Equipment Committee and the National Insulated Glass Committee. The company is in the service of construction glass and glass-use industries. It is mainly specialized in producing door-window of energy and conservation insulated glass production line of curtain wall, and glass deep-processing equipment.
Since the company established, it holds the concept of innovation with technology, sincere service, being honest and reliable, it produced large quantities of first-class insulated glass processing equipments. The products sell well at home and abroad, and some were exported to the countries in Europe, America and Southeast Asia.
Jinan Weili Machine Co., Ltd is wildly accepted by customers from home and abroad.
New Century/ New Image/ New Weili.
Strong market competition consciousness.
Makes us always ahead of the advanced technology.
Honor acquirement, quality affirmation.
The most sincere service and the superior quality will offer to you.
Weili, in new image
Develop with you hand in hand to create the future.
Do business with whole heart, and treat others with great sincerity.
We regard honesty as the basis of the business, and sharing as the soul.
While we try our best to make each product perfect, We make efforts to become the giant of service. We respect the customers, understand them and communicate with them friendly. We regard the customers as our partner, and provide them with amazing service. To offer high-quality products and satisfying service is also to accomplish ourselves. We promise sincere service consent 100 years.
We believe when we deal in our products, we are dealing in trustworthy at the same time.
So be Weili, do business with whole heart, and treat others with great sincerity.