Basic Info.
Color
Red(Depends on Customer′s Demands)
Max Glass Size
2500X3000mm
Washing Glass Speed
0-10m/Min
Washing Glass Thickness
3-15mm
Insulating Glass Thickness
≤40mm(Can Extend The Max Thickness)
Transmission Glass Speed
45m/Min
Function
Double Glass&Triple Glass& Stepped Glass
Transmission Type
Flexible
Automatic Production Line
Comprehensive
Flexible Production
Intelligent Manufacturing
Rhythm
Flow Production Line
Production Scope
Product Line
Transport Package
Plywood Pallet and Plastic Film
Specification
21600*2800*3450mm
Product Description
LBW1800PB Vertical Automatic Insulating Glass Inside Flat Press Multifunction Production Line
Usage: LBW1800PB Vertical Automatic Insulating Glass Gas Filling Inside Flat Press Multifunction Production Line is a high-efficiency insulating glass processing equipment. This line can achieve the Europe gas filling standard and satisfy all aspects of customers' demands with advanced technology, high production efficiency and complete functions. It is a better mass production equipment to produce insulating glass with high automatic degree, high efficiency, easiness of operation and maintenance.
Structure and Function for Each Part
This production line is composed of feed section, washing and drying section, transition and storage section, light inspection section and spacer bar location section, outside assembly section, inside flat press section, and storage section.
This line is controlled by PLC and realizes the automatic control and frequency control of the motor speed of the whole line. It adopts advanced assembly technique and solves the problems of uneven press and misplacement of the glass. The assembly section adopts limit switch and cylinder tank whose travel distance can be adjusted, making the operation easy and the location precise and the movement reliable.
There are two operation methods in the control panel: 'automatic' and 'manual'. If the separate operation of each section or maintenance is needed, the 'manual' operation method is needed.
The structure and function of each section are as following.
1) The entire machine's operation uses the man-machine contact surface (it has Chinese and English languages):
Operates direct viewing and convenient, the running status is dynamic demonstration, the frequency conversion velocity modulation; the maximum speed may amount to 45 meters/Minute.
2) High production efficiency: The big glass can move at the full speed, the small glass is possible to stop in storage area, and stay at the storage area temporarily, also the clean glass may input continuously.
3) Conserves energy interrupted type automatic operation system:
Entire machine uses the energy conservation interrupted type automatic operation system, when glass movement to the photoelectric sensor of the end of the input conveyor, the brush, the water pump, the air blower will be start automatically, when the production is interrupted, the brush, the water pump, the air blower will automatically stop, the section of the equipment which was occupied moves in full speed, other parts which do not work are at the intelligence dormant state, so it is energy saving.
Secotion1: Feed Section:
LOW-E glass automatic diagnosis system
It is the first section of the line and its main function is to transmit the glass to the washing and drying section.
LOW-E glass automatic diagnosis system can easily know whether low-E glass putting is right or not. When is wrong, the alarm will raise the alarm, and worker can change it immediately. This system prevents the membrane of coating glass (especially the LOW-E glass) from being destroyed, the glass input conveyor station is loaded with the coating glass automatic diagnosis system, fully guaranteed the correct washing and covering of the coating glass.
Section2:Washing and Drying Section:
Washing part:This part has three pairs of brushes (the material is high -temperature nylon wire ) and a pair of sponge roller. The brushes are driven by three synchronous motors separately and the movement is stable. Three pairs of tubular rollers type of hair brushes, use High Temperature Resistant and soft nature hair brush, fully guaranteed the coating glass especially the LOW-E glass layer stratification can't be destroyed.
5.1 Install 6 motors. from one motor with one pair brush to one motor one brush.it can last the usage life of the washing and drying section.
5.2 It adopts custom-made and imported nylon, front is three pairs of soft brushes(Φ0.07mm), back is three pairs of hard brushes(φ0.10mm),it last the brushes life.
5.3 According to the glass thickness, automatically control the spacing of the drag roller, it doesn't need any other manual adjustment for the glass that have different thickness in the adjustable scope by bearings.
5.4 The washing and drying section adopts stepped frequency conversion governor, which make the glass run at the appropriate speed stably.
5.5 Four levels of cleans, guarantee the best clean effect. The clean section uses the high quality stainless steel completely; the part, which may contact with water, uses the stainless steel or the copper nature material.
5.6 There is a first-level water tank, and two baffles. It can reserve 0.5m³ water.
Section3: Transition and Storage Section:
This section is used to transmit and store the glass to improve the work efficiency.
Section4. light inspection section and spacer bar location section
This section is used to inspect the washing and drying quality of the glass. The lights are put perpendicularly with the glass and the back board is painted black. It is easy to check the washing and drying effect. When the back end of the glass passes the photoelectric switch, the transmission speed will increase automatically.
When the glass is sensed by the photoelectric switch in this section, the transmission speed will slow down. The glass will slowly touch the side gauge bar and stops. It makes the location precise and avoids the crash of the glasses because of high speed transmission. The position to put spacer bar is located automatically by location paws and the spacer bar should be stick onto the glass manually.
Section5.Outside Assembly Section
These two wheels are controlled by Airtac cylinder, and they can easily push the glass tightly together.
The sensor can easily know the glass position and stop at right place when glass coming from the light and aluminum bar installation section.
Section 6.Inside Flat Press Section
10.1 In this section, the back board is steel plate with spraying plastic. Plate board is high density board with film, can be waterproofed, non-deformation, can bear beat.
10.2 Adopts imported high quality vacuum generator, it can keep pressure more than 0.8Mpa, and also can automatically adjust the sucker's power, avoid glass falling down.
10.3 This section can be opened to check and maintain. There are lifting up device, avoid misplacement of two or three glass, especially for big glass. There are straight line guide rail, it can guarantee glass press parallel with high accuracy.
10.4 The air cushion is clean with specific filtering air cushion system, can avoid the second pollution when glass pressing. The air cushion valve can be controlled.
10.5 It has high accuracy and high gas filling efficiency when automatic filling argon gas into double glazing, triple glazing and stepped glazing. Its argon concentration can reach ≥90 percent within 3 seconds.
10.6The soft and moisture proof plate and suckers are inside. It can automatic fill the argon gas from the bottom of this part. The machine is controlled by PLC, and the servo motors take the ball screw to achieve the assembly of double glazing and triple glazing.
Section7. Transition and Storage Section:
This section is used to transmit and store the glass to improve the work efficiency
Technical paramete
Power Supply | 380V/50HZ 35Kw |
Dimension(LxWxH) | 18390x2500x2950mm |
Production quantity | 600-700IG units/8hs |
Max Glass Size | 1800x2500mm |
Min Glass Size | 300x400mm |
Washing Glass Thickness | 3-15mm |
Washing Glass Speed | 0-10m/min |
Insulating Glass Thickness | ≤48mm |
Transmission Glass Speed | 0-45m/min |
Compressed Air: | 800L/min |
Air Pressure: | 1Mpa |
Main Electrical Components
No. | Name | Brand | Brand Place |
1 | PLC | OMRON | JAPAN |
2 | 10.0inch Touch Screen(10.0) | KINCO | SHENZHEN |
3 | Photoelectric Switch | AUTONICS | KOREA |
4 | Limit Switch | AUTONICS | KOREA |
5 | The ball-screw type linear guide | HIWIN | TAIWAN |
6 | Low-voltage electric components | SCHNEIDER | FRANCE |
7 | Pneumatic component | AIRTAC | TAIWAN |
8 | Multilevel vacuum generator | SMC | JAPAN |
9 | Vacuum relief valve | SMC | JAPAN |
10 | Transducer | Schneider | FRANCE |
11 | Soft Brushes | 0.7mm High Temperature Nylon Can wash low-e glass | JOINT VENTURE |
12 | The ball-screw type linear guide | HIWIN | TAIWAN |
13 | Cleaning Section | 304 Stainless steel | CHINA |
14 | Bearing of Cleaning Section | SKF(oil-free lubrication waterproof) | SWEDEN |
15 | Drive | TECO | TAIWAN |
16 | Servo motor | SIEMENS | GERMANY |
17 | Transmission motor | ZHIBAO | TAIWA |
Welcome to visit our factory!
Address:
No. 8, North Area, Xiaotun Industrial Area, Huaiyin District, Jinan, Shandong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Construction & Decoration, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001, ISO 9000
Company Introduction:
Jinan Weili Machine Co., Ltd is the member of China Glass Machinery Equipment Committee and the National Insulated Glass Committee. The company is in the service of construction glass and glass-use industries. It is mainly specialized in producing door-window of energy and conservation insulated glass production line of curtain wall, and glass deep-processing equipment.
Since the company established, it holds the concept of innovation with technology, sincere service, being honest and reliable, it produced large quantities of first-class insulated glass processing equipments. The products sell well at home and abroad, and some were exported to the countries in Europe, America and Southeast Asia.
Jinan Weili Machine Co., Ltd is wildly accepted by customers from home and abroad.
New Century/ New Image/ New Weili.
Strong market competition consciousness.
Makes us always ahead of the advanced technology.
Honor acquirement, quality affirmation.
The most sincere service and the superior quality will offer to you.
Weili, in new image
Develop with you hand in hand to create the future.
Do business with whole heart, and treat others with great sincerity.
We regard honesty as the basis of the business, and sharing as the soul.
While we try our best to make each product perfect, We make efforts to become the giant of service. We respect the customers, understand them and communicate with them friendly. We regard the customers as our partner, and provide them with amazing service. To offer high-quality products and satisfying service is also to accomplish ourselves. We promise sincere service consent 100 years.
We believe when we deal in our products, we are dealing in trustworthy at the same time.
So be Weili, do business with whole heart, and treat others with great sincerity.